|
Post by billymurray on Apr 9, 2015 8:28:20 GMT -5
Is there a way to easily determine the amount of stylus wear on a DD reproducer?
|
|
|
Post by lucius1958 on Apr 10, 2015 1:07:16 GMT -5
The 'easy' way is to set the reproducer down on the inner 'dead wax' area of a disc. If, after a while, you notice scratches in that area, that indicates the stylus is worn and should be replaced.
You can also check the stylus visually, using a high power jewelers' loupe and good lighting. Any wear should show up as a flat spot on the stylus tip: a good stylus will have a smooth, rounded tip.
BillS
|
|
|
Post by billymurray on Apr 10, 2015 17:56:10 GMT -5
Thank you sir, easy enough to do.
|
|