|
Post by debndunk on Jan 18, 2011 14:27:32 GMT -5
Hi everybody we are from England and are new to phonographs, but would like your help. I have 2 gems a model A with only a case and top workings and a Model B with only a motor and no top workings is it possible to make one good machine from these parts? Many thanks Gordon.
|
|
|
Post by maroongem on Jan 18, 2011 18:02:52 GMT -5
Hi Gordon and welcome to the board!
The A & B motors are significantly different enough so you couldn't take the B motor and put it in the A case. The largest issue being the location of the on/off/speed control knob on either machine. You may, however, be able to move the mandrel assembly from the A to the B depending on which variation of the Mod. A that you have.
Bill
|
|