Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 26, 2008 16:49:33 GMT -5
Okay gang, I am struggleing hard trying to get my reproducer to connect with a disc. I put a new spring on the lift rod, but it's not making contact. Also how, to I get the gear for the reproducer to stop scrapeing along the drive gear.
Paul
|
|
|
Post by maroongem on Feb 26, 2008 17:44:46 GMT -5
Ok, I'm assuming you got the new spring that is attached to the lift lever/shaft. There should be contact with the half moon milled area under the motor board when the lift lever is in the down position.3 o'clock(ie: the reproducer is on the record). In the up position,12 o'clock, try starting at 6/32 of an inch from the half mooned milled area under the motor board. This is trial and error but should be fairly easy with the set screw on the collar of the lift spring.
Bill
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 26, 2008 18:38:31 GMT -5
Thank you Bill, I will give it a try.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 29, 2008 21:16:54 GMT -5
I still can not get this d**n thing back together, and it's driving me nuts.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 1, 2008 8:14:56 GMT -5
Good News Bill, I now have my machine back in playing order. Thanks to Marcel, from the OTVMMB, he was able to help me readjust everything, and thank you, for your help as well. I appericate it.
Paul
|
|