|
Post by mewziklover on May 12, 2017 10:19:07 GMT -5
Hello All, Glad to find some other Edison owners...
I was lucky enough to recently acquire a Edison C-150 in working condition, Oak cabinet is in near perfect condition and it came with 25 Diamond Disks. I know it has been sitting a while and I want to make all the right moves when it comes to conserving this wonderful piece of history, I have done extensive research and reading on this machine and I have found some useful info but am still in need of some advice from those more knowledgeable than myself, so below is a short list of my questions, any help would be greatly appreciated...Thanks in advance.
1. Is there a particular brand or type of oil and grease I should use to lubricate the mechanisms? 2. Where Can I find a replacement Volume control ball? [Mine is sadly missing] 3. How do I determine if my diamond stylus/reproducer needs repair? 4. Will I need to replace the felt tips of the oiling tubes? If so is there a source for said felt pads? 5. Is there a source for more complete information on the Edison C-150 {very fragmented/incomplete info online} I want to learn as much as possible about my new purchase!
|
|
|
Post by lucius1958 on May 13, 2017 4:13:24 GMT -5
1. Most collectors recommend a good quality sewing machine oil for general lubrication: such areas as need greasing will do fine with Vaseline. (If you need to regrease the mainspring, a good automotive grease (lithium or molybdenum) will do.
2. I do not know whether anyone makes reproduction mute balls; but you might check around among some of the suppliers mentioned on this site, and see whether they have any good original assemblies you can use.
3. Most reproducers need, at the very least, a thorough cleaning, and replacement of the gaskets. The pivot for the weight should also be free of any friction or obstruction. To check the stylus, you should first try it out on the run-out area of a clean and flat Diamond Disc; if you see any scoring on the surface, that means the diamond is worn, and should be replaced. Also give it a visual inspection, using a high powered loupe or magnifier: if you see a flat spot, that is another sign of wear.
4. I have used small strips of regular felt, rolled up to fit the tubes, without much problems.
5. A good source of information on the Diamond Disc Phonographs is George L. Frow's "The Edison Disc Phonographs and the Diamond Discs" from Mulholland Press.
I hope this information is helpful to you.
BillS
|
|