|
Post by condensite on Aug 17, 2007 22:10:32 GMT -5
Hello all: I'll try this thread over here on the Edison board. No one seems to want to bother with it over on the OTHER board! ;D Just picked up a tabletop VV VI, and wondered if the crank is correct. The threaded shaft measures about 5 inches to the bend. It seems longer than necessary. Can someone check theirs out and let me know? Thanks. Condensite
|
|
|
Post by maroongem on Aug 17, 2007 23:34:05 GMT -5
Sean,
I thought that was rather long, so I checked with a friend who has two, and both of his are 3.5" to the bend.
Bill
|
|
|
Post by condensite on Aug 18, 2007 8:15:33 GMT -5
Thanks, Maroongem. That's what I figured. I got a reply from the other board too, along with a scan of an instruction manual for my particular model. It shows a shorter crank. I was lucky to find the right size among my own extra parts, so it worked out swell! Condensite
|
|