|
Post by Edison Restorer 64 on Feb 21, 2009 8:36:50 GMT -5
I have purchased an ediphone reproducer is it at all possible to make it fit in to the Edison d home? if there is a way can any one help many Thanks from Bill. website pic & Information information Ediphone - while not exactly what I would recommend for use, the reproducer from the early style 'Ediphone' will also fit the standard size carrier eye. The neck of these reproducers is very short and will not support a horn but can be used with a morning glory type horn which utilizes a rubber connector from the reproducer to the horn. They feature some type of paper or composite diaphragm which actually sounds quite good. These generally sell for $50.00 to $75.00 ebay purchase
|
|
|
Post by maroongem on Feb 25, 2009 16:25:46 GMT -5
Bill,
Looking at your new Reproducer carriage, this particular Reproducer won't fit w/o a reducing ring. You have the vertical carriage with the larger eye for Reproducers such as the Mod. N, Mod. O, and Diamond B(for BAs only).
Bill
|
|
|
Post by matty on Feb 25, 2009 16:49:08 GMT -5
This is the adaptor you'll need, and chances are one will cost you more than the ediphone reproducer did.
|
|
|
Post by Edison Restorer 64 on Mar 4, 2009 13:19:21 GMT -5
Ok Thanks so much Ill be saveing monies for the correct edison repoducer I most likely will only play the 4min for now maybe the 2 I have more 4 min than 2 any way I Appreciate all the time that you and everyone gives awnsering my questions again Many Sincere Thanks PS in your neck of the woods hopefull in April on the 25th for a metal Detcting hunt maybe its a long wasy from ya though chsire county
|
|