|
|
Post by bostonmike1 on May 21, 2009 21:21:17 GMT -5
My personal thanks to Maroongem (Bill) for his help and advice. Besides myself, as I read these posts , he is helping others with their questions -------and he should be commended. I cannot speak for others, but I thank you for allowing me to learn from you. Michael
|
|
|
|
Post by Edison Restorer 64 on May 21, 2009 21:45:05 GMT -5
;D Yes I Second the motion He has helped me a great deal with my Edison D home which was a Bugger to remove the old pot metal bearing he told me personally it is one of the toughest hes ever seen.
But a Big Thanks goes out to Maroongem(Bill) for all the hard work with helping me get that son of a gun bearing out without his help I would have destroyed another good d home bed plate.
sincerely Bill shenette
|
|
|
|
Post by matty on May 21, 2009 23:28:29 GMT -5
I too would like to thank Bill for the help & information he's given myself & others on this board (and other boards) over the years.
There isn't much he hasn't seen or done in this field, and he is extremely knowledgable. I'm sure many of our members past & present are very greatful for his involvement in this board, and his willingness to help others & share his experiences & knowledge.
And even though Bill & I don't always see eye to eye, it doesn't mean I don't appreciate all he does.
So thank you Bill.
|
|
