|
Post by tarheeltinkerer on Sept 20, 2009 20:28:36 GMT -5
The gear I am referring to is on the main spindle (the gear where the governor worm screw connects)...the one on my S-19 is separating and I just won some DD parts on ebay. My hope is to change out the gear...or if need be the entire spindle assembly (although I don't want to do this). If the gear can be exchanged, I would like to do this without changing out the entire spindle.
|
|
|
Post by maroongem on Sept 21, 2009 16:26:07 GMT -5
That gear is press-fit onto the worm gear/feed screw shaft, so you are better off replacing the whole assembly.
Bill
|
|
|
Post by tarheeltinkerer on Sept 21, 2009 17:46:31 GMT -5
Hi Bill,
Alas, tis what I was expecting. Hopefully the parts I won on ebay will fix the issue.
Frank
|
|